End pull designed for cavity slider doors (pocket doors) that go all the way into the cavity. These end pulls allow the user to pull the door out when the door is fully recessed into the wall cavity. They are also refer to as edge pulls and finger pulls.
Fixing via 2 screws concealed behind the lift up tab.
Ideal for any size sliding door.
Dimensions:
- Outer = 80mm H x 22mm W
- Inner opening dimension = 13mm H x 62mm W
- Cutout dimensions = 68mm H x 16mm W x 12mm D
Dimensions may vary from batch to batch so please use these dimensions as a guide only