Unlocking Methods
- Smart Phone
- Fingerprint
- Keypad
- Swipe Card (3 included)
- Key (2 included)
- Wifi
Backup Systems
What if the lock stops working or the batteries go flat?
Not to worry. There are 2 ways of unlocking the door if this occurs:
- There is a keyhole on the underside of the lock which allows you to operate the lock
- Next to the keyhole is a USB connection that you can use to attach your smart phone to the lock where the lock will use the battery power from your phone
- Audible warnings from the lock and your smart phone will occur when the batteries need changing
Simple and easy installation
- Mortice lock shown on diagram should be installed to manufacturers details.
- The Digital Locking Handle works by fitting over the top of the mortice lock.
- Compatible with Lockwood, Assa Abloy, Dorma Kaba and Legge style commercial locks whet the distance between the centre of the handle and the centre of where the key in the cylinder goes is 64mm
Key Features
| Front & Back Panel | 300x60x21mm |
| Door Type | Wooden, Aluminium or Steel |
| Power | 4xAA Batteries |
| Door Thickness | 35-65mm |
| Waterproof | IP55 |
| Salt Spray Test | 200 Hours |
| Temperature | -10 to 55 deg Celsius |
| Humidity | 0 to 95% |
| Low Wattage Alarm | Less than 4.8V |
| Battery Life | 10,000 operations |
Dust and Waterproof
Rated: IP55
Rubber gasket supplied with the lock need to be installed properly for it to achieve this level of protection. Click here to read more about what IP55 can widthstand
Compatible with other smart devices
Works with many smart devices and AI devices such as:
- Amazon Alexa
- Apple Watch
- Android Wear
- Google Home
- Alibaba
- Baidu
- Hotel PMS
- Zigbee
Feature of the TTLock App
NO | Name | Qty |
1 | Front Panel | 1 |
2 | Back Panel | 1 |
3 | Mortise | 1 |
4 | Card | 3 |
5 | Waterproof Rubber Plate | 2 |
6 | Strike&Strike Box | 1+1 |
7 | Screw Stubs:M5*30mm | 2 |
8 | Mortise Screws:10*5mm (For Aluminum Door) | 4 |
9 | Mortise Screws:25*4mm (For Wooden Door) | 4 |
NO. | Name | Qty |
10 | Sliding Screws:M5*10mm | 2 |
11 | 60mmSquare shaft | 4 |
12 | 80mm Square shaft | 2 |
13 | M5*30mm Screw | 2 |
14 | M5*40mm Screw | 2 |
15 | M5*50mm Screw | 2 |
16 | M5*60mm Screw | 2 |
17 | User Manual | 1 |
18 | U-Clip | 1 |
Initialisation
Open the cover plate of the front panel ,long press the “Reset” button on the back panel for 5s, press “000#”,and the initialization is complete
Ensure correct handing
- Install the mortice lock according to manufacturers instructions
- Install threaded posts – based on thickness of door
- Install rubber gasket
- Install spindle, U,clip (to secure the spindle).
- Make sure arrow pints in the same direction as handle
- Place assembly on the front of the door/gate making sure that spindle goes through the mortice/latch
- Pass cable through the door and connect
- Install rubber gasket to inside panel and fix top and bottom screw as shown
Install batteries and fit off cover plate
- You are now ready to connect to your phone app.
Software Installation
The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play, Yingyongbao, Baidu, Ali, 360, Huawei, and Xiaomi.
Important:
Once you have registered as the administrator for a lock, you will always be the owner of that lock unless you ‘Transfer The Lock’ or delete the lock from your app.