
Unlocking Methods
- Smart Phone
- Fingerprint
- Keypad
- Swipe Card (3 included)
- Key (2 included)
- Wifi
Locking Methods
- Hold down the ‘#’ button on the keypad for a few seconds until you hear the lock engage
- Smart Phone App – Hold down the large lock symbol on the app until the app tells you that the lock has been successfully locked.
- Smart Phone App – You can also set up the lock to auto lock after a period of time
- Key (2 included)
Backup Systems
What if the lock stops working or the batteries go flat?
Not to worry. There are 2 ways of unlocking the door if this occurs:
- There is a keyhole on the underside of the lock which allows you to operate the lock
- Next to the keyhole is a USB connection that you can use to attach your smart phone to the lock where the lock will use the battery power from your phone
- Audible warnings from the lock and your smart phone will occur when the batteries need changing
Simple and easy installation
- This lock uses a standard latch and striker found on most common entrance lock sets.
- Bore hole of 50-54mm is required for main part of the mechanism
- 2 screw and posts are required above and below the bore hole. The one above is flexible in its location (can be moved up and down)
Key Features
Front Panel | 195x73x24mm |
Back Panel | 195x73x24mm |
Colour | Black |
Door Type | Wooden, Aluminium or Steel |
Power | 4xAA Batteries |
Door Thickness | 35-65mm |
Waterproof | IP55 |
Salt Spray Test | 200 Hours |
Temperature | -10 to 55 deg Celsius |
Humidity | 0 to 95% |
Low Wattage Alarm | Less than 4.8V |
Battery Life | 10,000 operations |


Dust and Waterproof
This lock has been tested in line with standards EN 60529:1991 + A1:2000+A2:2013
Rated: IP55
Rubber gasket supplied with the lock need to be installed properly for it to achieve this level of protection.

Compatible with other smart devices
Works with many smart devices and AI devices such as:
- Amazon Alexa
- Apple Watch
- Android Wear
- Google Home
- Alibaba
- Baidu
- Hotel PMS
- Zigbee
Feature of the TTLock App


NO | Name | Qty |
| NO. | Name | Qty |
1 | Front Panel | 1 | 13 | Strike&Strike Box | 1+1 | |
2 | Back Panel | 1 | 14 | User Manual | 1 | |
3 | Mortise:latch | 1 | 15 | U-Clip | 2 | |
4 | Card | 3 | 16 | M3*10mm Panel screws | 4 | |
5 | Mechanical Key | 2 | 17 | 60mm/80mm Square shaft | 2 | |
6 | Waterproof Rubber Plate | 2 | 18 | M4*25mm Screw for Door Thickness 35-39mm | 2 | |
7 | Screw Stubs:M5*30mm Door Thickness 35-39mm | 2 | 19 | M4*30mm Screw for Door Thickness 40-50mm | 2 | |
8 | Screw Stubs:M5*35mm Door Thickness 40-60mm | 2 | 20 | M4*40mm Screw for Door Thickness 51-60mm | 2 | |
9 | Screw Stubs:M4*30mm Door Thickness 35-39mm | 2 | 21 | M5*25mm Screw for Door Thickness 35-39mm | 1 | |
10 | Screw Stubs:M4*35mm Door Thickness 40-60mm | 2 | 22 | M5*30mm Screw for Door Thickness 40-50mm | 2 | |
11 | SlidingScrews:M5*15mm | 2 |
| 23 | M5*40mm Screw for Door Thickness 51-60mm | 2 |
12 | Mortise Screws:10*5 (For Aluminum Door) | 4 |
| 24 | Mortise Screws:25*4mm (For Wooden Door) | 4 |

Initialisation
Open the cover plate of the front panel ,long press the “Reset” button on the back panel for 5s, press “000#”,and the initialization is complete
On the front handle

On the internal handle


- Install latch in door as per standard installation.
- Use template provided to cutout holes in the door
- Install sliding screw
- Install spindle – make sure arrow faces down
- Make sure rubber gasket is fitted properly to the back of the lock

- Make sure cable has been placed through the door so it’s accessible from the inside
- Fix gasket onto back plate as shown
- Fix screws as required

- Connect cables as shown
- Screw inside handle onto fixing plate as shown

- Install 4 x AA Batteries
- Fix cover plate
- Your are now ready to pair your lock to your smart phone

Software Installation
The software (iOS version) can be downloaded from the app store, and the Android version can be downloaded from the application store of Google play, Yingyongbao, Baidu, Ali, 360, Huawei, and Xiaomi.
Important:
Once you have registered as the administrator for a lock, you will always be the owner of that lock unless you ‘Transfer The Lock’ or delete the lock from your app.